IoT Products

WireX is a flexible and cost-effective solution allowing legacy equipment with built-in analog modems to connect to the cellular packet data or circuit-switched data networks.
Thousands of expensive Fixed-line used for connecting devices can be immediately replaced by cost-competitive cellular SIM cards thus decreasing the overall telecommunication budget without any effort and at the same time offering worldwide mobility for end-users.
Acting as a plug-and-play PSTN to GPRS gateway, the WireX does not require any changes to the host/connected device: simply unplug the phone jack from the wall socket and plug it into the WireX traditional dial-up PSTN network Emulation Input socket. The data previously transferred over the modem link is automatically transmitted over IP frames on the GPRS or GSM Data CSD cellular network. Network Conversion The WireX demodulates the analog flow to extract its data and transfer it over GPRS/3G within TCP frames. The integrated FXS interface allows WireX to reproduce the behavior of the wired analog phone network by generating dial-tones, busy tones, ring signals, etc. Plug & Play The preconfigured WireX comes bundled with a cellular subscription and can be shipped directly to each device location for an instantaneous and costless installation. Cost Savings Switching to GPRS/3G subscriptions allows to benefit from adapted billing and to use flexible high bandwidth Internet access at your company’s central server site.

Technical Specification

Hardware

  • Class10 GSM / GPRS Quad-Band Modem
  • RJ11 POTS / FXS interface
  • Dimensions 120(W) x 103(D) x 36(H) mm
  • Operating Environment: 0 to + 45°C
  • Internal Antenna & SIM card holder
  • Power Supply 12V
  • Internal Li-Ion Battery
  • LEDs indicating GSM Signal Strength
  • Wall mounting casing
Software
  • Standard Network Termination Emulation (POTS)
  • V21, V22, V22bis, V23, V32, V32bis and V34 modem support
  • RFC-compliant TCP client and server
  • Embedded Web Server
  • Dynamic DNS client
  • Remote control over GPRS network and FXS Interface
  • POP3/SMTP client for mail exchange
  • Automatic GPRS attachment
Conversion Modes
  • ISP: IP frames from the device are directly transferred through GPRS after call setup
  • Transparent: raw data from the device are encapsulated in TCP frames through GPRS after call setup
  • GSM Gateway: analog calls from the device trigger GSM calls
  • ReverseRAS: raw data from the device are sent through GPRS to the eDevice ReverseRAS server

CHARACTERISTICS:

Power Supply » DC Voltage Supply » 5-24V
Power Supply » Battery » Operation / Standby Time
Environment » Temperature Range » Home and Office Use (-20°C / +55°C)
Interface » Type of Inputs / Outputs » Digital
Interface » Type of Inputs / Outputs » Analog

WireX - Analog To Wireless Gateway - Brochure