RF
|
- Supports various RF Networks
- CDMA (1xRTT/EVDO), UMTS (WCDMA/HSPA), WiMAX, LTE
- EV-DO (REV A) - 3.1 Mbps (peak download) 1-2 Mbps (typical), 1.8 Mbps (peak upload) 300-500 kbps (typical)
- HSPA+ - 42 Mbps (peak download), 5.76 Mbps (peak upload)
- SMA antenna connector options available
- Optional 802.11 Wi-Fi (client/AP)
- Optional 802.15.4 for WPAN accessory support
|
Ethernet
|
- RJ45/Ethernet 10/100 base T
- Always on Ethernet connection (plug and play)
- MODBUS TCP
- Configuration commands interface (telnet/SSH or http)
- 2 Ethernet ports (WAN, LAN), not multiplexed (switched) but 2 separate ports
|
Serial
|
- Serial RS-232, DB-9 port for legacy/ RTU/SCADA
- PPP over serial, PAD, Serial MODBUS, console, serial, display device support
|
USB
|
- High speed external USB host port
|
Power
|
- 5.5 V to 36 V continuous, transient (spike) protection
- 300-400 mA at 12 Volts
- Less than 1mA standby at 12 volts
- Protection to SAE J1455
- Locking 3 wire power
- Ignition sense
|
Other
|
- Internal Micro SD memory card support (2GB max)
- 3-axis digital accelerometer
- Real time clock
- Status LEDS
- Powerful 250Mhz, 32 bit ARM 9 based Networking and Communication Controller Microprocessor
- 64 Mbytes of RAM (build options up to 256 Mbytes)
- On board USB device support
|
GPIO
|
Inputs (Analog or Digital)
- 2 x differential inputs that can be configured for voltage or 4-20 mA loop current sense, 4 x single ended inputs
- 0-10V dynamic range (12 bit resolution, 0.3% accuracy)
4 Digital Outputs
- 500 mA sink capability, overload protection
- Open drain configuration
- 1 x output power (5-36 V)
- 14 position, dual row 3.5 mm pitch Term Block
- Plug Wieland part #: 27.631.3753.0
|
CAN2.0B Bus
|
- 1 x CAN2.0B Bus Port
- Plug Wieland part #: 27.631.3253.0
|
GPS
|
- L1 (1575.42 MHz) frequency 22 channel continuous tracking receiver
- Accuracy: 1.8 metres
- Hot Start: 1 second typical
- Cold Start: 34 second typical
- Tracking sensitivity: -165 dBm
- SMA GPS antenna connector
- 3 V active antenna support
|
Environmental
|
MIL-STD-810G:
- Clause 501.5: Procedure II - High Temperature test (+75°C operational test)
- Clause 502.5: Procedure II - Low Temperature test (-35°C operational test)
- Clause 503.5: Procedure I-C - Thermal Shock test (+75°C to -35°C operational test)
- Clause 507.5: Procedure II - Humidity 95% RH operational test
MIL-STD-810F:
- Method 514.5C - Random Vibration - Frequency range 5-500 Hz, 0.008 g2/hz spectral density operational test
- Method 516-I - Shock - 40g, 11ms, Saw-tooth pulse shape, 3 axis operational test
|
Options and Software
|
- Custom on board application processing capability (Linux O/S 2.6.32 KERNEL)
- Second Serial port
- Opto-isolated (2500 Volts) RS-485
- Satellite module support
- Support for RFID devices (iButton®, HID Card)
- Chameleon Planet
Device monitoring software
- WPAN Device Accessories
E-VDT, Man Down Pendant, etc.
|
Rugged Design
|
- Wide operating temperature range (-30°C to +65°C)
- Shock absorbing mounting bracket for enhanced shock and vibration isolation
- CNC machined aluminum/hi-impact thermoplastic composite enclosur
|
Approvals
|
- FCC, Industry Canada, RoHS Compliant, CE (pending)
|
Warranty
|
- 3 year standard warranty, optional 5 year warranty
- Best in class support group for custom application and device configuration
|