IoT Products

Entirely dedicated to the geolocalisation and embedded
information services, the GenLoc 41e  modem combines GSM/GPRS and GPS functions
in a single robust case.

The GPS information may be transmitted by either SMS or
GSM/GPRS data communication.

The same product manages the 50 channel GPS
function. The high sensitivity GPS (160 dbm) solution ensures
the reception of GPS data in difficult environmental conditions.

The modem is Quad-band (850/900/1800/1900 MHz) and GSM/GPRS
Class 10.

Optional battery back-up, 3 axis accelerometer and 1-Wire
interface, associated with EGM (Erco &
Gener Middleware) development tool, offer the
possibility for the personalisation of supplementary applications.

The GenLoc 41e modem is equipped with TCP/IP protocols as
well as 3 inputs and 1 output allowing the immediate development of onboard high
value-added telematic solutions.

 

Technical Specification

Characteristics

GSM / GPRS FEATURES
-
E-GSM Quad-band 850/900/1800/1900 MHz
- ETSI GSM Phase 2+
   o Class 4
(2W @ 900 MHz)
   o Class 1 (1W @ 1800 MHz)
- SIM Toolkit Release 99

VOICE FEATURES
- Voice
(GSM mode)
- Telephony, Emergency Numbers 112
- Full Rate, Enhanced Full
Rate, Half Rate (FR/EFR/HF/AMR)
- Echo cancellation and noise reduction

- Full Duplex Hands Free

DATA FEATURES
- GPRS
Class 10 (Up to 4Rx / 2Tx)
- Supports PBCCH, coding schemes: CS1 to CS4
- TCP/IP libraries (PPP, TCP Socket, UDP Socket, SMTP, FTP)
- Asynchronous
data circuit, transparent and non-transparent up to 14400 bits/s
- SMS point
to point MT/MO and SMS CB

GPS FEATURES
- 50 channel µblox receiver
- Precision:
    o 2,5m CEP

    o DGPS 2m CEP
    o A-GPS compatible
    o GALILEO
compatible
- Acquisition time:
    o Hot start: 1 sec
    o
Cold start with A-GPS: 15 sec
    o Cold start without A-GPS: 29 sec
-
Re-acquisition time after loss of signal < 1 s
- Hight Sensitivity: -160
dBm when Tracking
- Protocols:
    o NMEA-0183
    o UBX
binary
- Integrated supply for active 3V GPS antenna
-
Antenna fault detection (absence or short-circuit)

INTERFACES
- Antenna,
2 separate connectors:
    o GSM: FAKRA-D male
    o GPS: FAKRA-C
male
- Power supply: 6.5Vdc to 32Vdc (micro-FIT connector)
- RS232 + Audio
via a female 15-pin Sub-D
- AT commands: GSM 07.05 and 07.07
- Specific
GenLoc 31e AT commands:
    o Multiplexage DSR / position (NMEA)
    o
Multiplexage DTR / position (NMEA)
- 3 opto-coupled inputs, 3Vdc to 32Vdc
(micro-FIT connector)
- 1 open-collector output 60Vdc - 1A (micro-FIT
connector)
- SIM card reader (SIM 3V - 1,8V)
- Buzzer ouput
-
Watchdog
- 2 fixing brackets
- Power and I/O cables included

AVERAGE POWER
CONSUMPTION

With external power 13,7 Vdc
- Idle mode: > 10
µA
- Energy saving mode:
   o GPS OFF - GSM OFF: < 12 mA
   o GPS
OFF - GSm ON: < 14 mA
- In communication: < 200 mA
- Boot system:
< 7 sec

ENVIRONMENTAL &
MECHANICAL

- Operating temperature: - 20°C to + 60°C
- Storage
temperature: - 40°C to + 85°C
- IP31 aluminium case: Length 73 mm x Width 54
mm x Depth 25 mm
- Weight: 95g

APPROVALS
- R&TTE
(Radio & Telecom. Terminal Equipment)
- European Certification
-
RoHS compliant

OPTIONS
- Battery
back-up
- RTC back-up
- 3 axis accelerometer
- Analog input instead of
one input
- 1-Wire interface (iBotton) instead of one input
- GSM antenna
(FAKRA-D female)
- GPS antenna (FAKRA-C female)
- Serial Data cable -
15M/9F or Data/Audio cable -15M/9F/RJ9
- 230 Vac - 12 Vdc power supply
-
DIN Rail fixing
- GenBlue 15e: remote-supply Bluetooth® / RS232
adapter
- Gen 10400 : RS232 / Digital
Tachograh adapter
- Warranty extension

 

CHARACTERISTICS:

Environment » Temperature Range » Industrial (-25°C / +65°C)
Interface » Bus System » Can
Interface » Type of Inputs / Outputs » Digital
Interface » Type of Inputs / Outputs » Analog